| |
|
Painting a door by putting it flat on a pair of sawhorses
is the best way to prevent drips and runs. You can paint
in a garage or other area that will keep odors from
lingering inside your house. It's also the fastest way
– by removing all the hardware, you won't have to
paint around any obstacles. Now is the time to change
styles or replace worn hardware. Just be sure to take your old hardware
with you when you shop for replacements to make sure you
get the correct sizes. |
|
|
|
 Remove the
door by driving the lower hinge pin out with a screwdriver
and hammer. Have a helper hold the door in place as you
drive out the pin. |
 |
| |
| |
|
 Place the
door flat on sawhorses to paint it. On paneled doors,
paint in the following order: 1) recessed panels, 2)
horizontal rails, and 3) vertical stiles. That way, you
won't leave any unnecessary brush marks. |
 |
| |
| |
|
 Let the door
dry completely. If a second coat of paint is needed, sand
the door lightly and then wipe it with a tack cloth before
repainting. |
 |
| |
| |
|
 Seal the
unpainted bottom edge of the door with clear wood sealer
to prevent moisture from entering the wood. Any water will
cause the wood to warp and swell, resulting in a door that
won't close properly. |
 |
| |
|
|
|
|
|
RELATED PROJECTS
Painting a Door (While Attached)
Painting Trim
Painting Window Frames |
|
|
| |
