|
|
Be careful in using laundry
products not to spill them on exterior of dryer. Wipe up
any spills at once. Most exteriors are painted (synthetic
enamel) which can be damaged or removed by chlorine
bleach, ammonia, solvents or other chemicals often used in
laundering and stain removal. Do not use dryer top as
work-top for stain removal unless it is protected by heavy
plastic cover, or for rust removal. Use sink instead and
(follow remover product label directions exactly including
flushing sink
with cold water!.
Do not spray pre-wash stain removers on clothing on top of
dryer unless top is protected completely; this may corrode
plastic control parts as well as paint.
Clean lint filter after each load for efficient drying. If
load is very linty, clean filter part-way through drying
cycle also. Clean out exhaust vent system at least once a
year, and be sure it is not clogged at any time. NEVER
vent dryer into house; vent outside.
Check labels on garments and other textile items and never
dry with heat those items which warn against such drying
lest a fire start. Never dry items used with
solvent or waxes for the same fire hazard reason.
Check loads before drying to remove any crayons, or other
items which could soften with heat and stain clothes
and/or dryer.
Follow manufacturers instructions in manual on using
fabric softeners in dryer, and do not use any type they
warn against. |
|
|
|
|
| |
|
|
|
|
|
