Screws, They can keep so many things together. But they can be frustrating to work with. Well, I have a few tips to make the job easier.

If you have a loose screw that just won't stay in place, all you need is some clear nail polish. Just take the nail polish and paint the bottom of the screw. Put the screw back into place. It will act like a glue and keep it nice and snug.

When removing screws an easy way to keep track of them is just to grab some masking tape. Unravel a few inches and when you take out your screws just stick them to the tape. Now you know exactly where they are when you need them. You can also use a piece of cardboard. Just poke the screws into the corrugated center.

Combination Squares

A combination square has a ruled blade that slides back and forth, and an angled handle with a level in it...

Cutting Glass

Whether you're framing a picture or replacing a small windowpane you may have to cut some glass. Well, don't be intimidated...

Drill Bits

Not exactly sure what drill bit you need for the job? I have a guide to get you drilling in the right direction...

Easy Ways to Measure

Getting the correct measurements is important for any project, but it can get frustrating...

Extension Cord Safety

Extension cords are a necessity in any household, but it's really important that you make sure that you have the right one for the job...

Handy Helpers

Who doesn't love to find an easier way to do something? Here are some really handy tips for your projects...

Jigsaws

If you work on a lot of projects that you need to cut curves, then you need a jigsaw...

Ladder Tips

Everybody needs a ladder once in a while, but using one can sometimes be a chore...

Level It

A level is a handy tool to own. There are a few types out there, so I have a little info to bring you up and on the level...

Lubricants

The old saying goes, the squeaky wheel gets the grease, but what do you do if you have run out of oil...