So you've had it with that, nasty old bathroom vanity. Well replace it. You can do it yourself. I'll show you how. All you need is a few tools and a little bit of time!

Turn off the water supply under the sink and test the faucets to be sure it is off. Lay an old towel on the bottom of the vanity to catch any access water.

Loosen the slip nuts connecting the sinks drainpipe to the drain assembly. Not all vanities are the same. If your vanity has a back you might have to remove the entire joint. Then, disconnect the supply lines from the faucet.

If Use a handheld mirror to see if there are clips that attach the sink to the vanity. If there are, loosen there aren't, look for a bead of sealant holding the two together and slit that with a utility knife

Once all of the plumbing is disconnected and the sink is loose, lay a tarp on the floor outside the bathroom and put on your gloves and safety glasses.

Carefully pull the sink off of the vanity and place it on the tarp so it won't damage the floors.

Loosen the screws that hold the cabinet to the wall, shimmy it up onto an old towel and slide the cabinet out of the room.

Once the vanity is removed, you will likely need to do a little repair on the wall and the floor.

Remove Bathtub Decals

Bathtub decals are great for giving you a non-slip tub, but they can get cruddy. If you want to remove yours, here's how it's done...

Repair Porcelain

You don't have to live with that cracked porcelain sink. It's easy to fix...

Repairing Grout

Hurry and replace the grout in your shower when it cracks and falls out, or you could end up with some serious water damage...

Replace a Tile

Are you living with a cracked or broken tile? Don't, it's easy to replace and you can do it yourself...

Replacing Grout

Where there is chipped and cracked grout there is the possibility of water damage, why not fix it...

Seal Grout

Applying a sealer to your tile grout is a necessary step to make sure that your work looks good for years to come. It's easy to do...