|
Cleaning Curtains & Draperies
Spring cleaning: it can
sound overwhelming, but as far as the curtains and
draperies go, it doesn't have to be that bad. I have some
easy tips...
Coping With Baseboards
If you want to install
baseboard moldings and have a professional looking finish,
you will have to learn about coping. I'll fill you in...
Crushed Carpet
Have you ever moved your
furniture around and then had to live with ugly carpet
dents? It's an easy problem to fix...
Curtain Adaptation
Window treatments don't fit?
Whether you've moved, mislaundered or bought the wrong
size, I have some simple alterations that will save you
the trouble and cost of replacement...
Deadbolt Locks
Deadbolt locks help keep
your home secure and your family safe. If your door has
windows on either side of the lock, replace the lock with
a double cylinder deadbolt for extra security...
Door Mouldings
Installing molding can be
tricky, and door casings are no exception. Well I have
some hints that will make the job easier...
Door Viewer
Don't you hate it when
someone knocks on your door... |
Inside mounting gives you a nice, clean look, but outside
mounting will give you better light control. So really
it's a matter of preference. Here's how to measure for
both. 
For inside mounting, measure the distance between the two
points where you'll place your brackets. Take measurements
for the top, the middle and the bottom of the window. Use
the narrowest measurement. Next, measure the length of the
window from the casing at the top of the window down to
the sill. 
For an outside mount, measure the width of the window and
add three inches to the measurement. This will give you an
inch and a half overlap on both sides. Then measure the
length of the window starting three inches above the
window and stopping at the sill. 
To hang the blinds, hold the brackets in place and mark
the screw positions with a pencil. Carefully, drill pilot
holes into the casing. Attach the brackets with screws.
Place the blinds into the brackets and slip the end caps
into place for a nice finished look. 
Install a cleat or two cup hooks spaced a few inches apart
to wind your cord around, especially if you have little
ones.